Stainless Steel Paint

The Steel It is a stainless steel epoxy system from Stainless Steel Coatings Inc. that protects above-water structures from water, salt air, detergents and solvents. It consists of an epoxy primer and finish coating with a 316L stainless steel leafing pigment that creates a gray satin finish.


The paint is available in gallon and quart kits, and can be applied by brush, roller or spray gun. It is chip-resistant and forms a protective metallic barrier capable of withstanding a continuous 2,000-hour salt spray test.

Read More

Leaf Collection Hoses

Flexhaust has added a complete line of lawn and leaf collection hoses to its collection of landscaping equipment. Designed to meet OEM material requirements, the hoses are available in 2 inches to 24 inches and 60 mm to 300 mm sizes, depending upon the product to which they will be attached.

Read More

Fluorescent Lamp Recycling

Mercury Waste Solutions offers the LampTracker DualGuard fluorescent lamp recycling system for short-term storage, shipping and recycling of mercury-containing fluorescent lamps. The container features a sturdy dual-box design that provides protection for lamps during storage and transportation. The system also provides protection to individuals against lamp breakage and contact with hazardous materials. The company offers online tracking to ensure compliance. Customers can order the prepaid box containers online, which are delivered with bilingual instructions for assembly.

Read More

Fluorescent Lamp Recycling

Air Cycle offers the Bulb Eater fluorescent bulb crushing system to meet disposal needs. The OSHA- and EPA-compliant units are designed to make disposal and recycling processes more efficient, improving bulb storage, handling and safety/liability issues. The fully contained Bulb Eater system crushes spent bulbs in seconds, compacting them into specially designed 55-gallon containers. It uses a two-stage filtration process that captures 99.99 percent of released mercury vapor and particulate matter.

Read More

Warewasher

Stero introduces the Ecorinse series of conveyor warewashers, high-temperature systems that use less water and energy to operate. The series uses a two-stage final rinse system, consisting of 1/4-horsepower motor pumps at 165 degrees and 20psi of 180-degree water. It uses 18,000 watts less of electrical current than standard washers to maintain the final rinse.


The number of clean racks produced per hour with Erorinse is 10 percent more than the current Stero model, and gallons of water used during the final rinse is reduced by 59 percent from current models.

Read More

Voltage Drop Calculator

The Voltage Drop Calculator, offered by System Sensor, is a Web-based tool that provides architects and engineers assistance in the design of audible/visible notification device circuits. It uses data provided by the user to perform calculations, and can be used on a Mac or PC computer without Internet connection once it has been downloaded.


It features a step-by-step process that allows users to calculate the voltage drops along an NAC by analyzing each device on the circuit and determine if enough operating voltage is available at each location.

Read More

Ice maker

Hoshizaki America Inc. introduces the KM-255 BAH Crescent Cuber Ice machine with built-in storage to its product line. The unit produces up to 235 pounds of ice within 24 hours, and features a built-in storage bin that holds up to 120 pounds.


The product’s ice-making zone is protected by an antimicrobial agent, and the unit complies with all government guidelines. It features a stainless steel evaporator with no plating or chipping, which allows for individual crescent cubes to be formed on both sides of the evaporator.

Read More

Tool Box Liners

Andax announces its new toolbox liners, designed to protect toolboxes, tool chests or roller cabinet drawers from grease, scratches and dirt. The sorbent liners soak up oils and grease, and help keep tools clean and dry. They resist slipping and bunching, lay flat and will not slide, according to the company.


The liners are designed for use in any drawer, including kitchen and household, and are reusable and easily replaceable. The liner kits fit most Snapon, Craftsman, Matco and Husky toolboxes. Custom-cut liners are also available.

Read More

Vacuum Lifter

Anver Corporation manufactures the VPE-3 Vacuum Lifter, a heavy-duty machine that allows one person to lift large porous boards.


The product is equipped with foam suction pads that can handle particleboard, wood byproducts and drywall. The below-the-hook lifter feature eliminates blocking, slings custom jigs and the potential to damage edges.


The lifter has a five HP motor that produces up to 24-inch Hg vacuum. The 20-foot long beam with adjustable crossbeams and suction pads can be positioned to accommodate windows and other cut-outs.

Read More

Noise-Reducing Fan

The Whisper Quiet Fan has been added to the Baltimore Aircoil Company’s Series 1500 product line. The fan significantly reduces the sounds generated by the unit with minimal impact on thermal performance.


The fan provides a cost-effective solution that maximizes energy savings while maintaining CTI-certified performance. The fans can be used to satisfy a code, neighbor or time-of-day specification.


The Series 1500 product family includes Series 1500 cooling towers, FXV closed-circuit cooling towers and CXV evaporative condensers.

Read More